Strain Gages - Model 4200HT High Temperature Strain Gage
The Model 4200(HT), 4202 and 4210 Vibrating Wire Embedment Strain Gages are designed for direct embedment in concrete. The Model 4200 (standard model) has a 153 mm gage length and is commonly used for strain measurements in foundations, piles, bridges, dams, containment vessels, tunnel liners, etc. The Model 4210 has a 250 mm gage length and is designed for use in mass concrete with coarse aggregates. It is extra rugged to resist bending, and has large flanges to provide greater engagement area. The 4202, with a 51 mm gage length, is designed for laboratory use and/or where there are space limitations.
|Standard Range||3000 microstrain||Active Gage Length||144mm|
|Resolution||1.0 με||Thermal Coefficient of Expansion||12.0 ppm/°C|
|Accuracy¹||±0.5% F.S.||Coil Resistance||120 Ω|
|Nonlinearity||< 0.5% F.S.||Cable Type||4 conductor shielded 22 awg|
|Temperature Range||–20°C to +80°C||Frequency Datum³||800 Hz|
¹±0.5% F.S. with standard batch calibration. ±0.1% F.S. with individual calibration. Accuracy established under laboratory conditions.
²Other lengths available on request.